• prduct1

Products

ET1090/ET1091 Benchtop LCR Meter for Component Measurement

Short Description:

ET1090 and ET1091 series LCR digital bridge is a component parameter analyzer based on the principle of automatic balancing bridge. Its 10Hz-100kHz test bandwidth, frequency continuous adjustable, 0.2% basic measurement accuracy and the file classification function provided by the instrument provide accurate and complete measurement and analysis for most components and materials, which are widely suitable. Used in product development, component inspection, product on-line inspection and other applications. 


Product Detail

Product Tags

Product characteristics

¤ The highest measuring frequency is 100kHz, and the stepping; frequency is continuously adjustable at 1Hz;

¤ Test level 10~2000 mV, 1 mV step continuously adjustable;

¤ Supporting DC Resistance (DCR) and Electrolytic Capacitance Measurement;

¤ Internal bias voltage output 10mV~1500mV;

¤ 3.5-inch TFT display, 5-bit display;

¤ Data recording function (maximum, minimum, average);

¤ Supporting SCPI Communication Protocol;

¤ Provide system settings to configure Chinese or English, buzzer, screen brightness, etc;

¤ The basic measurement accuracy is 0.2%;

¤ Manual and automatic range;

¤ With open circuit and short circuit calibration function;

¤ Comparator sorting (5 gears), alarm function. 

Main technical indicators

Model

ET1090A

ET1090B

ET1090C

ET1091A

ET1091B

ET1091C

Testing frequency

10 points (100, 120, 200, 400, 800, 1K, 2K, 4K, 8K, 10K)

12 points (100, 120, 200, 400, 800, 1K, 2K, 4K, 8K, 10K, 15K, 20K)

16 points (100, 120, 200, 400, 800, 1K, 2K, 4K, 8K, 10K, 15K, 20K, 40K, 50K, 80K, 100K)

10-10KHz continuous adjustable, 1Hz stepby-step

10-10KHz

continuous

adjustable, 1Hz stepby-step

10-100KHz

continuous

adjustable, 1Hz step by-step

Display screen

Display screen 3.5 inch TFT LCD

Number of display digits

Principal parameter: 5 digit,Secondary parameter: 5 digit

Measured parameter

Principal parameter: L/C/R/Z,Secondary parameter: X/D/Q/θ/ESR

Measurement Range

L:0.001μH~9999H

C:0.001pF~99.999mF

R:0.0001Ω~99.99MΩ

Basic accuracy

0.20%

Measuring display speed

2 time/s (slow), 4 times/s (medium), 8 time/s (fast)

Internal bias

0-1500mV adjustable, at a step of 1mV.

Testing level

Six fixed level(0.1V、0.3V、0.6V、1V、1.5V、2V)

0.1~2V adjustable, at a step of 1mV.

Signal source output

impedance

30Ω、100Ω

Calibration function

Open circuit calibration, short circuit calibration

Screening function

The limit range of screening can be set to -50%~+50%, and the fixed points are 1%, 5%, 10% and 20%.

Comparator

5 groups sorting,3 groups of qualified setting, one group of unqualified setting, one group of auxiliary setting

Interfaces

standard: RS232(or 485), USB Device, Handler ;optional: GPIB,USB Host

Others

Support dc resistance (DCR), electrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional

General technical specifications

¤ Power supply voltage: 220V.AC±10%, or 110V.AC±10%, 45~65Hz;

¤ Power consumption: <10W;

¤ Display: 3.5 inch TFT LCD screen, resolution 480 *320, color 16M;

¤ Temperature range: Operating state 10℃~+40℃, non-operating state -10℃ ~+60℃;

¤ Humidity range: 0 ~ 40 C, < 90% relative humidity;

¤ Interface: RS232 (or 485), USB Device, Handle, GPIB, USB Host. 

Standard accessories

¤ Three core power cord(30A51)

¤ 4-terminals of kelvin testing cable(35A51) 

ET1090ET1091 Benchtop LCR Meter for Component Measurement 1
ET1090ET1091 Benchtop LCR Meter for Component Measurement 2
ET1090ET1091 Benchtop LCR Meter for Component Measurement 3
ET1090ET1091 Benchtop LCR Meter for Component Measurement 4

  • Previous:
  • Next:

  • Write your message here and send it to us