• prduct1

Products

ET1080 Handheld New Compact LCR Meter

Short Description:

ET1080 series hand-held bridge sets 2.8 inch TFT display, flexible and convenient button operation and full speed USB communication in one; large capacity lithium battery can ensure long-term work. Functionally, it has not only comprehensive measurement parameters, but also deviation measurement and screening. The output frequency can be continuously adjusted. In terms of performance, the basic accuracy is up to 0.2%. 


Product Detail

Product Tags

Product Features

¤ The highest measuring frequency is 100kHz, and the stepping frequency is continuously adjustable at 1Hz;

¤ Supporting DC Resistance and Electrolytic Capacitance Measurement;

¤ Internal bias voltage output (10mV-500mV);

¤ Automatic Recognition of Component Measurement;

¤ Support screening and deviation measurement;

¤ 2.8-inch TFT display, 4-bit semi-display;

¤ USB communication interface;

¤ Large capacity lithium battery power supply;

¤ Support SCPI protocol;

¤ Provide system settings, can configure language, buzzer, screen brightness and so on according to their own requirements;

¤ The basic measurement accuracy is 0.2%;

¤ Adjustable measuring speed, manual and automatic range;

¤ Short circuit correction with open circuit;

¤ Provide multiple test ports. 

Main technical indicators

Model ET1080A ET1080B ET1080C ET1080D ET1080E
Test frequency 100Hz,120Hz,1KHz,10KHz 100Hz,120Hz,1KHz,10KHz,40kHz,100KHz 100Hz,120Hz,1KHz, 10KHz 100Hz, 120Hz, 1KHz,10KHz, 40KHz, 100KHz 100Hz-100KHzContinuously adjustable

1Hz stepping

Basic accuracy 0.30% 0.30% 0.20% 0.20% 0.20%
Display 2.8 inch TFT LCD
Display digit Main parameters: 5 bits, secondary parameters: 5 bits
Measurement parameters Main parameters: L/C/R/Z, sub-parameters: X/D/Q/theta/ESR
Electrolytic capacitor mode ×
DCR mode × ×
measuring range L:0.000μH~2000H,C:0.000pF~20.000mF,R:0.0001Ω~200.00MΩ
Measurement display speed 1/s (slow), 2/s (medium), 4/s (fast)
Internal offset × 0-500 mV adjustable, 1 mV step.
Test level 0.6Vrms 0.1Vrms、0.3Vrms、0.6Vrms 0-0.7V adjustable
Calibration function Open circuit calibration and short circuit calibration
Screening function The limit range of screening can be set to 1%-50%, of which the fixed points are 1%, 5%, 10%, 20%.
Deviation measurement Used to compare the percentage of deviation between the component and the nominal value set and display
Other Adjust backlight brightness, automatic shutdown time can be set, Chinese and English optional, USB Device communication

Standard accessories

¤ Mini-USB data Wires;

¤ Power adapter;

¤ Short circuit chip;

¤ Red&black rubber plug;

¤ Large capacity lithium battery

¤ Kelvin test clip(Except ET1080A, 1080B) 

Optional accessories

¤ Kelvin test clip( ET1080A, 1080B)

¤ SMD testing clam

ET1080 Handheld New Compact  LCR Meter 2
ET1080 Handheld New Compact  LCR Meter 3
ET1080 Handheld New Compact  LCR Meter 4
ET1080 Handheld New Compact  LCR Meter 5

  • Previous:
  • Next:

  • Write your message here and send it to us