Wholesale ETP6X Series Single Channel DC Power Supply Supplier and Factory

ETP6X Series Single Channel DC Power Supply

Short Description:

This series of adjustable DC stabilized power supply is a single output DC stabilized power supply with four digits LED digital display. It can simultaneously display voltage, current; Constant voltage (CV), constant current (CC) mode automatic switching, voltage and current can be continuously adjusted; Using advanced switching power control technology and components, high efficiency, light weight, energy saving and environmental protection. In the meanwhile, the 5V/2A USB fast charge function is optional.

Send email to us

Product Detail

Product Tags

Edit ETP-BSeries DC Power Supply User Manual

Products Features Basic function

LED digital display, 4 digits display of voltage, current and power

Over voltage, over current, over power, over temperature protection

Intelligent cooling fan with energy saving

3 sets of Shortcut parameter storage/call function

5V/2A USB fast charge function(optional)

Encoder adjustment, the specified numbers can be adjusted accurately

Technical Index

Index Model	ETP 1506B	ETP 1520B	ETP 3005B	ETP 3010B	ETP 6003B	ETP 6005B	ETP 10003B	ETP 15002B
Output voltage	0~15V	0~15V	0~30V	0~30V	0~60V	0~60V	0~100V	0~150V
Output current	0~6A	0~20A	0~5A	0~10A	0~3A	0~5A	0~3A	0~2A
Stabilized Voltage status	Voltage stability：≤0.1%±3mV; Load stability：≤0.1%±3mA
Stabilized Current status	Current stability：≤0.1%±3mV Load stability：≤0.1%±3mA
Display accuracy	Voltage：0.5%±3readings Current：0.5%±3 readings
Ripple and noise	VPP≤1%
Display Resolution	Voltage：max 10mV; Current：Max 1mA; Power：Max 10mW
Display method	4 digits red LED display, 0.56 inches
Power supply	AC 220V±10% /50Hz or AC 110V±10% /60Hz(if 110V, users need to talk to factory in advance)
Operation environment	Indoor，attitude：<=2000m，temperature：5~40℃，humidity：10~85%RH
Storage environment	Temperature：-20~80℃，humidity：<=80%RH
Dimension	190mm* 115mm* 150mm （LWH）
Weight	Net weight : 1.3kg
Fuse specification	3A

Note: The above parameters are measured at the ambient temperature of 25±5℃, relative humidity <80%RH, and preheating for 30 minutes. Actual parameters may vary slightly.

1.1 Accessories

Use manual × 1

Qualified certificate × 1

Power plug × 1

1.2 Communication

①Communication parameter

Baud rate：9600

Start bit：1

Data bit：8

Calibration bit：/

Stop bit：1

Footer：0x0A(newline) or 0x0D0A(CRLF)

②Cable connection

Standard communication port: RS232

Optional communication port: USB/ RS485

The following table describes the definition of the DB9 female interface at the end of the product.

PIN No	Definition	Explanation
2	TXD	RS232 Serial port data sending pin
3	RXD	RS232 Serial port data receiving pin
5，9	GND	Signal Ground
6	A	RS485_A Pin
7	B	RS485_B Pin
Other pins	/	No meaning

Note: In the case of standard configuration, the corresponding interface (or pin) of optional communication function is empty. Users need to inform them in advance when configuring the optional communication function.

Previous: ETP3000A Series Single channel DC Stabilized Power supply

Next: YET215X Series Earth Resistance Tester

Dc Power Supply、Dc Power Supply Adjustable、Dc Power Supply Connectors

Write your message here and send it to us