High Quality Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang
High Quality Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang Detail:
¤ The 3.5 inch 480×320 TFT LCD screen has a clear graphical interface.
¤ Support menu in Chinese and English.
¤ Dual channel output, maximum output frequency 70MHz.
¤ The two channels are independent of each other and have phase synchronization function.
¤ 160MSa/S sampling rate, 12 bit vertical resolution, 16K storage depth.
¤ Built in 5 basic waveforms and 60 arbitrary waveforms.
¤ Waveform storage: supporting 10 sets of user defined editing waveforms.
¤ The pulse wave output at the edge time can be set.
¤ Internal / external AM, FM, FSK, PM, ASK, PSK modulation function.
¤ Output of linear / logarithmic sweep and pulse train waveform.
¤ High precision frequency meter with 200MHz.
¤ It has RS232 interface, USB Device, USB Host interface, GPIB (optional), supports U disk storage.
¤ Equipped with multi-function arbitrary waveform editing software.
¤ Supply voltage: 220V.AC±10%, or 110V.AC ±10% (optional), 45~65Hz.
¤ Power consumption: <40W.
¤ Display: 3.5 inch TFT LCD screen, resolution 480 x 320, color 16M color.
¤ Temperature range: operating state 10℃ ~+40℃ , non operating -10℃ ~+60℃ .
¤ Chumidity range: 0~40℃, less than 90% relative humidity.
¤ Interface: RS232, USB Host, USB Device, GPIB (matching).
¤ Size: 265 x 105 x 305mm (wide * high * Deep).
¤ Weight:2.6kg.
Matching Accessories
¤ One three-core power cord.
¤ Two power fuses.
¤ 1 user manual.
Optional Accessories
¤ CD.
¤ USB cable.
¤ RS232/485 cable.
¤ The output line.
| Frequency Characteristics | ||||||
|
Model |
ET3310 |
ET3325 |
ET3340 |
ET3360 |
ET3370 |
|
|
Waveform types |
Sine, square, triangle, pulse, noise and arbitrary waves (including DC) |
|||||
|
Sine |
1uHz ~ 10MHz |
1uHz ~ 25MHz |
1uHz ~ 40MHz |
1uHz ~ 60MHz |
1uHz ~ 70MHz |
|
|
Square |
1uHz ~ 5MHz |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
|
|
Triangle |
1uHz ~ 500kHz |
1uHz ~ 500kHz |
1uHz ~ 1MHz |
1uHz ~ 2MHz |
1uHz ~ 2MHz |
|
|
Noise (-3dB) |
7MHz Bandwidth |
|||||
|
Pulse |
100uHz ~ 5MHz |
100uHz ~ 10MHz |
||||
|
Arbitrary wave |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
||||
|
Frequency Resolution |
1uHz |
|||||
|
Frequency Accuracy |
±5ppm |
|||||
| Sine Wave Characteristics |
CH1 |
CH2 |
||||
|
Harmonic distortion(>1Vpp) |
0~1MHz: <-45dBc;1MHz~10MHz: <-40dBc;10MHz~20MHz: <-30dBc 20MHz~40MHz: <-25dBc;40MHz~70MHz: <-20dBc |
0~1MHz: <-45dBc 1MHz~40MHz: <-40dBc;40MHz~70MHz: <-35dBc |
||||
| Total harmonic distortion |
<0.2% (20Hz-20kHz, 1Vpp) |
|||||
| Square Wave Signal Characteristics | ||||||
|
Rise/fall Time |
<20ns |
|||||
|
Overshoot |
<5% |
|||||
|
Duty cycle |
≤100kHz: 1%~99%;≤5MHz: 20%~80%;≤10MHz: 40%~60% (0.1% resolution) |
|||||
|
Dissymmetry(50% duty cycle) |
1% Period + 5ns |
|||||
|
Jitter |
6ns +0.1% Period |
|||||
| Ramp Wave Characteristics | ||||||
|
Linearity degree |
≤0.1% Peak output |
|||||
|
Symmetry |
0.0~100.0%(resolution 0.1%) |
|||||
| Pulse Wave Characteristics | ||||||
| Pulse width | Min 20ns;1ns resolution | |||||
| Edge transition time | Min 20ns | |||||
| Overshoot | <5% | |||||
| Jitter | 6ns +0.1% Period | |||||
| Arbitrary Wave Characteristics | CH1 | CH12 | ||||
| Sampling speed | 160MSa/S | 160MSa/S | ||||
| Waveform amplitude resolution | 12bits | 10bits | ||||
| Waveform length | 16k | 4k | ||||
| Minimum rise/fall time | <20ns | <20ns | ||||
| Jitter | 6ns+30ppm | 6ns+30ppm | ||||
| Storage quantity | 10 waveforms | 10 waveforms | ||||
| Output Characteristics | ||||||
|
Amplitude (50Ω) |
||||||
|
Range |
1mVpp~10Vpp ≤20MHz;1mVpp~5Vpp >20MHz |
1mVpp~3Vpp ≤20MHz |
||||
|
Accuracy |
±1% set value ±1mVpp(1kHz Sine,0 offset,>10mVpp) |
|||||
|
Resolution |
1mV or 3 bit |
|||||
|
Flatness(relative to 1K Sine, 1 Vpp) |
±0.1dB,≤100kHz;±0.3dB,≤5MHz;±0.4dB,≤25MHz;±1dB,≤70MHz |
±0.1dB,≤100kHz;±0.2dB,≤5MHz;±2dB, ≤40MHz;±5dB,≤70MHz |
||||
|
Offset (50Ω) |
||||||
|
Range |
±5Vpk ,ac + dc |
±1.5Vpk ,ac + dc |
||||
|
Accuracy |
±(1% set value +5mV+0.5% amplitude) |
|||||
|
Output impedance |
50Ω |
|||||
|
Protection |
Short circuit protection, automatically disables the waveform output when overloading |
|||||
| SYNC Output | ||||||
|
Level |
TTL compatibility |
|||||
|
Impedance |
50Ω |
|||||
|
Rise/fall time |
<25ns; |
|||||
|
Maximum frequency |
25MHz |
|||||
| AM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Modulation depth |
0%~120% |
|||||
| FM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Frequency offset |
0~Maximum carrier frequency |
|||||
| FSK Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse or arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Square wave of 50% duty ratio |
|||||
|
Keying frequency |
2mHz~1MHz |
|||||
| Frequency Sweep (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Types |
Linearity/Logarithm |
|||||
|
Start/Stop Frequency |
1uHz~Maximum carrier frequency |
|||||
|
Sweep frequency time |
1ms~500s |
|||||
|
Trigger source |
Manual operating, internal, external |
|||||
| Burst characteristics (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse, noise and arbitrary waveforms (excluding DC) |
|||||
|
Pulse count |
1~65535 or infinite, gated |
|||||
|
Start/stop phase |
0~360° |
|||||
|
Internal period |
1us~500s |
|||||
|
Gating source |
External |
|||||
|
Trigger source |
Internal, external, manual operating |
|||||
| Frequency Meter | ||||||
|
Frequency range |
1Hz~160MHz |
|||||
|
Frequency resolution |
6 bit/s |
|||||
|
Voltage range and sensitivity |
100mVpp~5Vpp |
|||||
|
Input adjustment |
Input impedance:1MΩ |
|||||
|
Coupled modes:AC |
||||||
| Trigger Input | ||||||
|
Level |
TTL compatibility |
|||||
|
Slope |
Rise/Fall |
|||||
|
Pulse width |
>100ns |
|||||
|
Reaction time |
<500ns(burst) |
|||||
|
<10us(sweep frequency) |
||||||
| Modulation Input | ||||||
|
Impedance |
1MΩ |
|||||
|
Signal range |
±5V ac + dc |
|||||
Product detail pictures:
Related Product Guide:
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for High Quality Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang , The product will supply to all over the world, such as: Adelaide, Grenada, El Salvador, Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We've been able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and items. For anyone who is interested in our company and products, be sure to make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are about to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please genuinely feel no cost to speak to us for enterprise. nd we believe we have been gonna share the most effective trading practical experience with all our merchants.
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.




