Wholesale Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang Supplier and Factory

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang

Short Description:

Product Detail

Product Tags

Feedback (2)

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for Programmable Dc Power Supply, Dc Electronic Load Tester, Dry Block Temperature Calibrator Price, We have professional products knowledge and rich experience on manufacturing. We always believe your success is our business!

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang Detail:

¤ The highest measuring frequency is 100kHz, and the stepping frequency is continuously adjustable at 1Hz;

¤ Supporting DC Resistance and Electrolytic Capacitance Measurement;

¤ Internal bias voltage output (10mV-500mV);

¤ Automatic Recognition of Component Measurement;

¤ Support screening and deviation measurement;

¤ 2.8-inch TFT display, 4-bit semi-display;

¤ USB communication interface;

¤ Large capacity lithium battery power supply;

¤ Support SCPI protocol;

¤ Provide system settings, can configure language, buzzer, screen brightness and so on according to their own requirements;

¤ The basic measurement accuracy is 0.2%;

¤ Adjustable measuring speed, manual and automatic range;

¤ Short circuit correction with open circuit;

¤ Provide multiple test ports.

Model	ET1080A	ET1080B	ET1080C	ET1080D	ET1080E
Test frequency	100Hz,120Hz,1KHz,10KHz	100Hz,120Hz,1KHz,10KHz,40kHz,100KHz	100Hz,120Hz,1KHz, 10KHz	100Hz, 120Hz, 1KHz,10KHz, 40KHz, 100KHz	100Hz-100KHzContinuously adjustable 1Hz stepping
Basic accuracy	0.30%	0.30%	0.20%	0.20%	0.20%
Display	2.8 inch TFT LCD
Display digit	Main parameters: 5 bits, secondary parameters: 5 bits
Measurement parameters	Main parameters: L/C/R/Z, sub-parameters: X/D/Q/theta/ESR
Electrolytic capacitor mode	×	√	√	√	√
DCR mode	×	×	√	√	√
measuring range	L：0.000μH～2000H，C：0.000pF～20.000mF，R：0.0001Ω～200.00MΩ
Measurement display speed	1/s (slow), 2/s (medium), 4/s (fast)
Internal offset	×		0-500 mV adjustable, 1 mV step.
Test level	0.6Vrms		0.1Vrms、0.3Vrms、0.6Vrms		0-0.7V adjustable
Calibration function	Open circuit calibration and short circuit calibration
Screening function	The limit range of screening can be set to 1%-50%, of which the fixed points are 1%, 5%, 10%, 20%.
Deviation measurement	Used to compare the percentage of deviation between the component and the nominal value set and display
Other	Adjust backlight brightness, automatic shutdown time can be set, Chinese and English optional, USB Device communication

¤ Mini-USB data Wires;

¤ Power adapter;

¤ Short circuit chip;

¤ Red&black rubber plug;

¤ Large capacity lithium battery

¤ Kelvin test clip(Except ET1080A, 1080B)

¤ Kelvin test clip( ET1080A, 1080B)

¤ SMD testing clam

ET1080 Handheld New Compact LCR Meter 2

Product detail pictures:

Related Product Guide:

We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang , The product will supply to all over the world, such as: Porto, San Diego, Washington, We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, thorough meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.