• prduct1

Products

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Every single member from our large efficiency profits team values customers' requirements and organization communication for Sine Wave Signal Generator, Electronic Digital Thermometer, Temperature Calibrator Dry-Block, "Change for the better!" is our slogan, which means "A better world is before us, so let's enjoy it!" Change for the better! Are you ready?
Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang Detail:

¤ The highest measuring frequency is 100kHz, and the stepping frequency is continuously adjustable at 1Hz;

¤ Supporting DC Resistance and Electrolytic Capacitance Measurement;

¤ Internal bias voltage output (10mV-500mV);

¤ Automatic Recognition of Component Measurement;

¤ Support screening and deviation measurement;

¤ 2.8-inch TFT display, 4-bit semi-display;

¤ USB communication interface;

¤ Large capacity lithium battery power supply;

¤ Support SCPI protocol;

¤ Provide system settings, can configure language, buzzer, screen brightness and so on according to their own requirements;

¤ The basic measurement accuracy is 0.2%;

¤ Adjustable measuring speed, manual and automatic range;

¤ Short circuit correction with open circuit;

¤ Provide multiple test ports. 

Model ET1080A ET1080B ET1080C ET1080D ET1080E
Test frequency 100Hz,120Hz,1KHz,10KHz 100Hz,120Hz,1KHz,10KHz,40kHz,100KHz 100Hz,120Hz,1KHz, 10KHz 100Hz, 120Hz, 1KHz,10KHz, 40KHz, 100KHz 100Hz-100KHzContinuously adjustable

1Hz stepping

Basic accuracy 0.30% 0.30% 0.20% 0.20% 0.20%
Display 2.8 inch TFT LCD
Display digit Main parameters: 5 bits, secondary parameters: 5 bits
Measurement parameters Main parameters: L/C/R/Z, sub-parameters: X/D/Q/theta/ESR
Electrolytic capacitor mode ×
DCR mode × ×
measuring range L:0.000μH~2000H,C:0.000pF~20.000mF,R:0.0001Ω~200.00MΩ
Measurement display speed 1/s (slow), 2/s (medium), 4/s (fast)
Internal offset × 0-500 mV adjustable, 1 mV step.
Test level 0.6Vrms 0.1Vrms、0.3Vrms、0.6Vrms 0-0.7V adjustable
Calibration function Open circuit calibration and short circuit calibration
Screening function The limit range of screening can be set to 1%-50%, of which the fixed points are 1%, 5%, 10%, 20%.
Deviation measurement Used to compare the percentage of deviation between the component and the nominal value set and display
Other Adjust backlight brightness, automatic shutdown time can be set, Chinese and English optional, USB Device communication

¤ Mini-USB data Wires;

¤ Power adapter;

¤ Short circuit chip;

¤ Red&black rubber plug;

¤ Large capacity lithium battery

¤ Kelvin test clip(Except ET1080A, 1080B) 

¤ Kelvin test clip( ET1080A, 1080B)

¤ SMD testing clam

ET1080 Handheld New Compact  LCR Meter 2
ET1080 Handheld New Compact  LCR Meter 3
ET1080 Handheld New Compact  LCR Meter 4
ET1080 Handheld New Compact  LCR Meter 5


Product detail pictures:

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang detail pictures

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang detail pictures

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang detail pictures

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang detail pictures

Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang detail pictures


Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm for the long-term to create jointly with consumers for mutual reciprocity and mutual reward for Good quality Electronics Component Tester - ET1080 Handheld New Compact LCR Meter – Zhongchuang , The product will supply to all over the world, such as: Australia, Qatar, Canberra, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
  • The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Maxine from Namibia - 2018.09.29 17:23
    After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
    5 Stars By Cheryl from Brunei - 2017.05.02 11:33
    Write your message here and send it to us