• prduct1

Products

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Lcr Meter Benchtop, Dc Load, Handheld Process Calibrator, Our merchandise are new and previous prospects consistent recognition and trust. We welcome new and outdated shoppers to contact us for long term small business relations, common advancement. Let's speeding within the dark!
ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang Detail:

¤ 0.05% basic accuracy.

¤ Measuring speed up to 200 times per second.

¤ 10Hz-1MHz Frequency Measurement Range, Continuous Adjustable, 1mHz Step.

¤ Test signal level 10 mV-2 V adjustable, 1 mV step-by-step.

¤ Internal Programmable DC Bias Voltage-2V~+2V.

¤ Supporting external DC bias voltage-60V~+60V.

¤ Supporting external current source.

¤ Automatic Level Adjustment of Voltage or Current.

¤ V, I and other test signal monitoring functions.

¤ 10-Point List Scanning Test Function.

¤ 10-grade sorting and counting function.

¤ 100 sets of self-calibration data.

¤ Automatic and manual range.

¤ 7 inch LCD display, Chinese and English interface.

¤ USB, LAN, RS232, GPIB, HANDLER interfaces. 

¤ Passive components: capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components and network components impedance parameter evaluation and performance analysis.

¤ Semiconductor components: C-VDC characteristics of varactor diodes; parasitic parameter analysis of transistors or integrated circuits.

¤ Other Components: Impedance Evaluation of Printed Circuit Board, Relay, Switch, Cable, Battery, etc.

¤ Dielectric materials: dielectric constant and loss angle of plastics, ceramics and other materials evaluation of magnetic materials: permeability and loss angle evaluation of ferrites, amorphous and other magnetic materials.

¤ Semiconductor Materials: Dielectric Constants, Conductivity and C-V Properties of Semiconductor Materials.

¤ Liquid Crystal Materials: C-V Characteristics of Dielectric Constants and Elastic Constants of Liquid Crystal Units. 

¤ Electronic capacitors, substrates, PCB, antennas, ferrites, shock absorbers, SAR phantom materials.

¤ Aerospace/National Defense Stealth, RAM (Radar Wave Absorbing Material), Radome.

¤ Industrial Material Ceramics and Composites Automotive Parts and Coatings.

¤ Polymers and Plastic Fibers, Films, Insulating Materials.

¤ Hydrogel disposable diapers and soft contact lenses.

¤ Liquid crystal display.

¤ Other products containing such materials such as tyres, coatings, adhesives, etc.

¤ Study on Fresh Preservation (Deterioration) of Food and Agricultural Food, Microwave Food Development, Packaging and

Moisture Content Measurement.

¤ Water Content Measurement and Oil Content Analysis of Wood/Paper Products in Forestry and Mining Industry.

¤ Pharmaceutical and medical drug research and production, biological implants, human tissue characterization, biomass, fermentation. 

Model

ET1092E

ET1092D

ET1092C

ET1092B

ET1092A

Test signal frequency range

10Hz-1MHz

10Hz-500kHz

10Hz-300kHz

10Hz-200kHz

10Hz-100kHz

Frequency Resolution and Accuracy

Resolution 1 mHz, accuracy 0.01%

Test parameters

Cp-D,Cp-Q,Cp-G,Cp-Rp,Cs-D,Cs-Q,Cs-Rs,

Lp-D,Lp-Q,Lp-G,Lp-Rp,Ls-D,Ls-Q,Ls-Rs,

Rs-Xs,|Z|-θr,|Z|-θd,|Y|-θr,|Y|-θd,G-B

Measuring display speed (> 100Hz)

Fast 50 times per second (20ms), moderate 10 times per second (100ms), slow 1.25 times per second (800ms)

Customized measurement speed(> 1kHz)

It can be set between 0.5 times per second and 200 times per second

LCR parameter display range

Cp、Cs:0.001000pF~99.9999F

Lp、Ls:0.001000nH~99.9999kH

Rp、Rs、|Z|、Xs:0.001000mΩ~999.999MΩ

G、B、|Y|:0.001000μS~999.999kS

θr:±0.000001rad~3.14159rad

θd:±0.000001deg~179.9999deg

D:±0.000001~9.99999

Q:±0.001~99999.9

Test signal voltage range

0~2Vrms

Voltage Resolution and Accuracy

Resolution 1 mV, accuracy 5%+5 mV

Test signal current range

100μArms~20mArms

Current Resolution and Accuracy

Resolution 10 μA, Accuracy 5%+50 μA

DC bias voltage source

 

Internal: – 2V ~+2V voltage bias, – 20mA ~+20mA current bias

External: – 60V ~+60V Voltage Bias

Internal resistance of signal source

30 ohms, 100 ohms optional

Basic accuracy

0.05%

Display resolution

6 1/2 digit

comparator

8 combination, 1 unqualified and 1 subsidiary

Trigger mode

Internal, manual, external, bus

Mathematical operations

Delta (absolute value), Delta (percentage), direct reading

Calibration function

Self-Calibration, Open Circuit, Short Circuit, Load, 100 Sets of Self-Setting Frequency Points

List scanning

10-Point List Scanning Test

Storage device

Internal /USB memory

Interface

GPIB、LAN、RS232、USB Host、USB Device、Handler,(3501 GPIB is the choice)

¤ Power voltage: 220V.AC ±10%, 50Hz,Optional 110V.AC ±10%, 50Hz;

¤ Power consumption: <20W;

¤ Display: 7” TFT LCD, with a resolution of 800*480;

¤ Interfaces: Ethernet, RS232, GPIB, USB and Handler interfaces;

¤ Service environment: 0°C-40°C;

¤ Sizes: 330mm*285mm*136mm (L*W*H);

¤ Weight: 3.6kg. 

¤ GPIB Cable (32P01);

¤ Rs232 Serial Port Line (32P04);

¤ USB Data Line (32P05);

¤ 2m/4m test cable (35P01);

¤ SMD patch element test fixture (35P02);

¤ LCR test pen/four-wire patch element test clamp (35P03);

¤ Kelvin Test Clamp (35P04). 

¤ Three core power cord(30P04);

¤ Kelvin test clip(35P04)

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge1
ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge2


Product detail pictures:

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang detail pictures

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang detail pictures

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang detail pictures

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang detail pictures


Related Product Guide:

To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang , The product will supply to all over the world, such as: Uruguay, Austria, Nepal, Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we've insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.
  • This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
    5 Stars By Poppy from Amsterdam - 2018.11.06 10:04
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Jessie from Georgia - 2017.08.28 16:02
    Write your message here and send it to us