• prduct1

Products

2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Thermocouple Calibrator, Programmable Ac Load, Power Supply, Your aid is our everlasting power! Warmly welcome clients in your own home and abroad to go to our enterprise.
2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang Detail:

¤ 0.05% basic accuracy.

¤ Measuring speed up to 200 times per second.

¤ 10Hz-1MHz Frequency Measurement Range, Continuous Adjustable, 1mHz Step.

¤ Test signal level 10 mV-2 V adjustable, 1 mV step-by-step.

¤ Internal Programmable DC Bias Voltage-2V~+2V.

¤ Supporting external DC bias voltage-60V~+60V.

¤ Supporting external current source.

¤ Automatic Level Adjustment of Voltage or Current.

¤ V, I and other test signal monitoring functions.

¤ 10-Point List Scanning Test Function.

¤ 10-grade sorting and counting function.

¤ 100 sets of self-calibration data.

¤ Automatic and manual range.

¤ 7 inch LCD display, Chinese and English interface.

¤ USB, LAN, RS232, GPIB, HANDLER interfaces.

¤ Passive components: capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components and network components impedance parameter evaluation and performance analysis.

¤ Semiconductor components: C-VDC characteristics of varactor diodes; parasitic parameter analysis of transistors or integrated circuits.

¤ Other Components: Impedance Evaluation of Printed Circuit Board, Relay, Switch, Cable, Battery, etc.

¤ Dielectric materials: dielectric constant and loss angle of plastics, ceramics and other materials evaluation of magnetic materials: permeability and loss angle evaluation of ferrites, amorphous and other magnetic materials.

¤ Semiconductor Materials: Dielectric Constants, Conductivity and C-V Properties of Semiconductor Materials.

¤ Liquid Crystal Materials: C-V Characteristics of Dielectric Constants and Elastic Constants of Liquid Crystal Units.

¤ Electronic capacitors, substrates, PCB, antennas, ferrites, shock absorbers, SAR phantom materials.

¤ Aerospace/National Defense Stealth, RAM (Radar Wave Absorbing Material), Radome.

¤ Industrial Material Ceramics and Composites Automotive Parts and Coatings.

¤ Polymers and Plastic Fibers, Films, Insulating Materials.

¤ Hydrogel disposable diapers and soft contact lenses.

¤ Liquid crystal display.

¤ Other products containing such materials such as tyres, coatings, adhesives, etc.

¤ Study on Fresh Preservation (Deterioration) of Food and Agricultural Food, Microwave Food Development, Packaging and

Moisture Content Measurement.

¤ Water Content Measurement and Oil Content Analysis of Wood/Paper Products in Forestry and Mining Industry.

¤ Pharmaceutical and medical drug research and production, biological implants, human tissue characterization, biomass, fermentation.

Model

ET3510

ET3505

ET3503

ET3502

ET3501

Test signal frequency range

10Hz-1MHz

10Hz-500kHz

10Hz-300kHz

10Hz-200kHz

10Hz-100kHz

Frequency Resolution and Accuracy

Resolution 1 mHz, accuracy 0.01%

Test parameters

Cp-D,Cp-Q,Cp-G,Cp-Rp,Cs-D,Cs-Q,Cs-Rs,

Lp-D,Lp-Q,Lp-G,Lp-Rp,Ls-D,Ls-Q,Ls-Rs,

Rs-Xs,|Z|-θr,|Z|-θd,|Y|-θr,|Y|-θd,G-B

Measuring display speed (> 100Hz)

Fast 50 times per second (20ms), moderate 10 times per second (100ms), slow 1.25 times per second (800ms)

Customized measurement speed(> 1kHz)

It can be set between 0.5 times per second and 200 times per second

LCR parameter display range

Cp、Cs:0.001000pF~99.9999F

Lp、Ls:0.001000nH~99.9999kH

Rp、Rs、|Z|、Xs:0.001000mΩ~999.999MΩ

G、B、|Y|:0.001000μS~999.999kS

θr:±0.000001rad~3.14159rad

θd:±0.000001deg~179.9999deg

D:±0.000001~9.99999

Q:±0.001~99999.9

Test signal voltage range

0~2Vrms

Voltage Resolution and Accuracy

Resolution 1 mV, accuracy 5%+5 mV

Test signal current range

100μArms~20mArms

Current Resolution and Accuracy

Resolution 10 μA, Accuracy 5%+50 μA

DC bias voltage source

Internal: – 2V ~+2V voltage bias, – 20mA ~+20mA current bias

External: – 60V ~+60V Voltage Bias

Internal resistance of signal source

30 ohms, 100 ohms optional

Basic accuracy

0.05%

Display resolution

6 1/2 digit

comparator

8 combination, 1 unqualified and 1 subsidiary

Trigger mode

Internal, manual, external, bus

Mathematical operations

Delta (absolute value), Delta (percentage), direct reading

Calibration function

Self-Calibration, Open Circuit, Short Circuit, Load, 100 Sets of Self-Setting Frequency Points

List scanning

10-Point List Scanning Test

Storage device

Internal /USB memory

Interface

GPIB、LAN、RS232、USB Host、USB Device、Handler,(3501 GPIB is the choice)

¤ Power voltage: 220V.AC ±10%, 50Hz,Optional 110V.AC ±10%, 50Hz;

¤ Power consumption: <20W;

¤ Display: 7” TFT LCD, with a resolution of 800*480;

¤ Interfaces: Ethernet, RS232, GPIB, USB and Handler interfaces;

¤ Service environment: 0°C-40°C;

¤ Sizes: 330mm*285mm*136mm (L*W*H);

¤ Weight: 3.6kg.

¤ GPIB Cable (32P01);

¤ Rs232 Serial Port Line (32P04);

¤ USB Data Line (32P05);

¤ 2m/4m test cable (35P01);

¤ SMD patch element test fixture (35P02);

¤ LCR test pen/four-wire patch element test clamp (35P03);

¤ Kelvin Test Clamp (35P04).

¤ Three core power cord(30P04);

¤ Kelvin test clip(35P04)

ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge1
ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge2


Product detail pictures:

2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang detail pictures

2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang detail pictures

2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang detail pictures

2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang detail pictures


Related Product Guide:

We constantly continually give you essentially the most conscientious client provider, plus the widest variety of designs and styles with finest materials. These initiatives include the availability of customized designs with speed and dispatch for 2020 China New Design capacitance tester meter - ET35 Series Benchtop High Frequency LCR Meter, LCR Bridge – Zhongchuang , The product will supply to all over the world, such as: Malawi, Ethiopia, Rio de Janeiro, Since the establishment of our company, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it.
  • Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
    5 Stars By Elva from Australia - 2018.07.26 16:51
    The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Belle from Jamaica - 2017.01.28 19:59
    Write your message here and send it to us